我看有些人会被画面所困扰!
我来提供一个修改的方法,但是不是很好,因为程式好像有时后会不稳,不过如果不介意的倒是可以试试看!

这个是上一代玩下来的心得!(希望各位能先备份mugen.cfg以备不时之需)
用记事本打开在dbz4\data里面的一个档案名叫『mugen.cfg』
打开后会看到很多参数!各位再依自己的需求更改吧!
[Video Win]
;Enter the width and height of the resolution you want to set here.
;The optimal resolution is 320x240, but if your video card has problems
;You may want to try 640x480.
这边就是改游戏视窗大小
Width = 320
Height = 240
修改后:
Widzh = 800
Height = 600
;This is the color depth at which to run MUGEN. You should set it to
;16 bit color unless your video card has problems with it.
;16-fastest, 24,32-slower, 8-slowest/worst
这边是改解析度,不过只有600x480以上的解析度才可以用32位元
Depth = 16
可用16也可用32。
;Set this parameter to 0 to disable screen stretching, and set it to 1 if
;you want to scale it up to fit the current resolution.
这边我也不会解释,如果你的视窗改成640x480以上的话那就要选一,不然画面会变得很小,这个质可能是填满整个画面吧!
Stretch = 0

修改后:
Sretch = 1
;Set this parameter to use a resolution-doubling filter. You will
;need a fast machine to use these filters. You will need to increase
;the screen resolution to at least 640x480 for these modes.
;0 - off
;1 - diagonal edge detection
;2 - bilinear filtering
;3 - horizontal scanlines
DoubleRes = 0
;DirectX mode
;Choose from Hardware, Software, Windowed, Overlay, Safe and None
;Hardware and Software run in full-screen. Windowed and Overlay
;run in a window. The windowed modes require you to set Depth to
;whatever color depth you are using for you desktop. The best results
;are when you run in 16-bit color. There is no advantage to running
;in 32-bit color. If Hardware, Software and Windowed fail, try Safe.
;None uses GDI to draw, so it's very slow. Use None only if
;you cannot get anything else to work.
;Overlay is not supported by all video cards, but can be faster than
;Windowed if it works.
这边能够改是要视窗模式还是整个萤幕,要改视窗模式的话就打windowed就能变成视窗显示,可以让你玩游戏顺便用msn!不过要记得把Stretch质调成1喔

DXmode = Hardware
全屏:DXmode = Hardware
窗口:DXmode = windowed
建议用窗口的。
要改的就是这些了。


